Emergency Lighting Testing London
We provide weekly and monthly fire alarm testing in London, Surrey and South-East England for all types of fire alarm and AOV systems.Block, Building or Property Manager?
Stamford James Safety specialise in Emergency Lighting Testing for Property Managers and Block Management Companies in London & Surrey. Speak to us today about a bespoke services package.Emergency Lighting Testing
In London, Surrey and South East England
Reliable emergency lighting is a vital part of any building’s safety system. In the event of a power failure, it provides essential illumination to help occupants exit safely. For residential blocks, commercial buildings, and communal areas, UK fire safety regulations require that all escape routes are clearly lit and properly signposted at all times.
Regular emergency lighting testing ensures your lighting system is fully operational and compliant with current legislation. A valid emergency lighting test certificate not only confirms the system is functioning correctly but also serves as proof of your legal compliance in the event of an inspection or incident.
Our team provides professional emergency lighting testing across London and Surrey, helping you meet your safety obligations with confidence.
Emergency Lighting Testing accross London, Surrey & South-East England
Single-site or multi-site testing
Emergency Lighting Testing, on Your Schedule
All makes and types of emergency lighting tested
Emergency call-out service
Bespoke Packages For Property Management Companies


The Regulatory Reform (Fire Safety) Order 2005
This regulation applies to common areas of residential buildings and places a legal duty on the Responsible Person to:
- Provide and maintain adequate emergency lighting where required for safe escape
- Ensure emergency lighting is tested and in efficient working order
BS 5266-1:2016
Widely recognised as best practice and used to demonstrate compliance with legal duties. Our recommendations:
- Monthly function tests (flick test)
- Annual full duration test (typically 3 hours)
- Proper record keeping in a logbook
Housing Health and Safety Rating System (HHSRS)
This gives local authorities powers to take enforcement action if poor emergency lighting creates a hazard under this risk-based assessment.Building Regulations 2010 – Part B
Applies to new builds or where significant alterations are made.
- Requires appropriate emergency lighting in escape routes and communal areas to ensure safe evacuation.
Emergency Lighting Testing In London Starts At £39+VAT
Free and fast quotations for Emergency Lighting Testing
Public Liability Insurance
Fully trained and vetted staff
Emergency Lighting Certificate issued After Testing
Peace of Mind with Regularly Scheduled Emergency Lighting Testing

Emergency Lighting Repairs or Replacements
PAT testing
Fire Alarm testing
(this is available as a separate service)
Emergency Light Testing Schedule.
Our London Emergency Lighting Testing Checks Include the Following Steps:
Check LED’s are on
Inspect indicator LEDs to ensure normal power and battery ‘health’ are signalled correctly.Monthly Functional (Flick) Test
Trigger the test via unit key switch, check each fitting lights up as intended, log and take any required action.Detailed Check (normally annually)
In addition to the flick test: clean fittings, inspect for physical damage, check bulbs, lenses, wiring, labels, and signage legibility, ensure illumination levels at exit routes meet requirements.
Annual Full‑Duration Test
Simulate a mains failure for the full rated duration (typically 3 hours), verify continuous light output and battery performance, on completion; confirm automatic switch-off and battery recharge function.
Emergency Lighting Retesting
Should any failures occur, once emergency lighting has been replaced, we retest to ensure the new light is working correctly.Logbook Review & Compliance Check
Maintain a comprehensive logbook with all test records, defects, remediation, and certificates.
Types of Emergency Lights We Can Test
Maintained emergency light
Works with a normal lighting system but also come on when the power failsNon–Maintained Emergency Light
The emergency lights switch on when the power failsSustained emergency light
A combination of maintained and non-maintained emergency lightingEmergency Lighting
Certificate.
Emergency Light Certificates are required after an emergency light testing and inspection has been carried out at your property.
Emergency light testing is recommended by Law in the UK for health & safety, the emergency light certificates must be held in a safe place as proof of compliance.
You will receive your emergency light certificate from us once the emergency light service has been completed. This will provide you with any recommendations that require fixing on the emergency lighting installed.
These recommendations may be damage, deterioration, defects or dangerous conditions.

How often should you get an emergency light certificate?
- Monthly emergency lighting Tests. (Switching the power of to ensure lights illuminate)
- 6 monthly emergency lighting Tests. (Let the batteries discharge for 1 hour to see if the lights stay on for the duration)
- Annually emergency lighting Test (Let the batteries discharge for 3 hour to see if the lights stay on for the duration)
What is the Importance of Emergency Light Testing on a Regular Basis?
Emergency lighting systems are lighting systems that automatically provide illumination when the mains power supply is cut. They are some of the most important systems in any property because they allow work continuity as well as the safe evacuation of people in case of fire or other emergencies.
This explains why emergency light testing should be done routinely. If you are an employer or an owner of a building, then you should conduct monthly emergency lighting tests as well as annual emergency lighting drain down services.